Table 24: Interactive Status Diagnostic Field Descriptions - Motorola DCX3520e-M Installation Manual

Diagnostics

Table 24: Interactive Status Diagnostic Field Descriptions

Field
IP Address
UPM
Upstream ID
Downstream ID
State
High-Definition DVR DCX3520e-M • Installation Manual
365-095-22819-x.1
Description
The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC 1500
to the DCX3520e-M. 0.0.0.0 is displayed if the IP address is not configured or
unknown.
The upstream modem address value is the same as the terminal ID assigned by the
DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and
16777215. 00000000 is displayed when the UPM is not configured or if it is
unknown.
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the
DCX3520e-M. 0000 is displayed if the Upstream ID is not configured or if it is
unknown.
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the
DCX3520e-M. 0000 is displayed if the Downstream ID is not configured or if it is
unknown.
The interactive status of the DCX3520e-M:
Front Panel OSD
U UNCONFIG
C MAC_CONNECT
Front Panel OSD
I dc INIT_WAIT_DC_OR_C
I L WAIT_LM_ACK
I SO WAIT_SO_ACK
I LA WAIT_LA_OR_SO
Description
The DCX3520e-M is not configured for
the interactive system, and the
platform should run as pre-interactive.
The DCX3520e-M is waiting to
establish a connection to the MAC PID
Stream.
Description
The DCX3520e-M is in the interactive
initialization state and waiting for the
default configuration or the contention
channel list messages.
The DCX3520e-M is in the interactive
initialization state and waiting for Link
Management Response ACK for Local
Address Message.
The DCX3520e-M is in the interactive
initialization state and waiting for a
Sign On acknowledgement.
The DCX3520e-M is in the interactive
initialization state and waiting for
Logical Address or Sign On with
verification Frequency message.
B
85