Installation Overview - Motorola DCX3520e-M Installation Manual

Installation

Installation Overview

1. Determine if you are connecting to a:
a. High-Definition TV or monitor:
•
Use the component video (YPbPr) or HDMI outputs. No other video
connection supports HDTV.
•
If the TV has a DVI input, connect a DVI-to-HDMI adapter or cable to the
HDMI out connector on the DCX set-top and the DVI-HDTV connector on the
TV.
b. Standard- Definition TV: Connect the composite video using a composite (RCA
phono) cable.
2. Determine if you are connecting the audio to a home theater receiver or directly to
the TV:
a. For an HDMI video connection, no additional audio connections to the TV are
required.
b. If the receiver or TV has a digital audio (S/PDIF) input, use the digital audio optical
(S/PDIF) output. Otherwise, use the baseband left and right audio out outputs.
3. Locate the cabling diagram(s) that best match the subscriber's configuration.
4. Connect the audio and video cables in a manner matching that diagram.
5. Determine if you are connecting to a data device (see
installation details, refer to the instructions included with the data device.
6. Connect the cable terminal to the coaxial cable wall outlet.
7. Perform the operational check for the remote control.
8. Optimize the High-Definition settings. See
manual.
High-Definition DVR DCX3520e-M • Installation Manual
365-095-22819-x.1
Data Device
Configuring the User Settings
B
Connections). For
in this
17