Checking Shift And 4Wd Cables (Aj); Checking Shift And 4Wd Cables (Aj); Using Biodiesel (Ak); Using Biodiesel (Ak) - Cushman 646442 Owner's Manual

7
hauler 4x4 Diesel
-2

ChECkING shIfT AND 4WD CABlEs (AJ)

(1) shift cable (2) Nut 1
(3) 4WD cable (4) Nut 2
1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine, raise the cargo
bed and support it.
WARNING
you can get burnt by touching

hot parts, such as the muffler.
Make sure the vehicle is not
hot before starting servicing.
3. unscrew nut 1 and adjust the
length of the shift cable.
4. unscrew nut 3 and adjust the
4WD cable.
5. to check 4WD operation, lift the
front and rear axles completely off
the ground and support with jack
stands.
6. start the engine and move the
2WD/4WD lever to "4WD" and
UUVo760A
"2WD" positions to check rotation
of each wheel.
Make sure that no one, espe-

cially children, near the vehi-
cle.

UsING BIoDIEsEl (Ak)

1. it is allowed to use 5% biodiesel
2. the biodiesel fuel should meet
3. for details about biodiesel use,
WARNING
fuel. if biodiesel fuel of higher ratio
is used, the engine can be dam-
aged and this will not be covered
by warranty.
a s t M D 6 7 5 1 , e N 1 4 2 1 4 a n d
equivalent standards.
contact your Dealer.