Changing Coolant (Q); Changing Coolant (Q) - Cushman 646442 Owner's Manual

1. park the vehicle on level ground
and apply the parking brake firmly.
2. check the coolant level through
the sight glass of the auxiliary
coolant tank. it is located on the
inner side of the right front wheels
well.
3. if the engine is hot, the coolant
level may be higher than normal.
in this case, run the engine at a
low speed without a load until the
coolant in the radiator is cooled
down and the coolant in the auxil-
iary coolant tank flows to the radi-
ator.
4. When the coolant is cooled down
sufficiently, add water an anti-
freeze mix to the auxiliary cool-
ant tank so that the coolant level is
between the Max and MiN limits.
5. if the coolant level decreases con-
tinuously, have your vehicle in-
spected by your Dealer.
IMpoRTANT
If you have to keep adding

water to the auxiliary cool-
ant tank, the coolant becomes
diluted and the radiator can
burst in cold weather. Contact
your Dealer to find the cause
and have fixed.
MaiNteNaNce

ChANGING CoolANT (Q)

WARNING
Do not remove the radiator cap

while the engine is hot. you
can get burnt by hot steam.
Make sure to remove it after
the engine and radiator have
cooled down enough.
1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine and let the engine
cooled down sufficiently.
3. open the hood.
(1) radiator cap
7
-2
7
UUVo729A