AMX NXT-CV10 Operation/Reference Manual page 75

802.11b wireless card
FIG. 65 Wireless Settings page (showing how each card supports its own security features)
You must first take down the SSID name, Current Key string value, and panel MAC
Address information so you can later enter it into the appropriate WAP dialog fields in
order to "sync-up" the secure connection. These values must be identically
reproduced on the target WAP.
6.
Press the Static WEP button to open the Static WEP Settings dialog (FIG. 66).
FIG. 66 Wireless Settings page - Static WEP security method
7.
Enter the SSID information by either:


8.
Press the SSID field and from the Network Name (SSID) keyboard, enter the SSID name you are using on
your target Wireless Access Point (case sensitive), and press Done when finished.




10" Modero Touch Panels
Automatically having it filled in by pressing the Site Survey button, navigating to the Site Survey
page, choosing a WEP secured WAP from within the Site Survey page, and then pressing the
Connect button.
Manually entering the SSID information into the appropriate field by following step 8.
The card should be given the SSID used by the target WAP. If this field is left blank, the unit will
attempt to connect to the first available WAP. By default, all WAP200Gs use AMX as their
assigned SSID value.
One of the most common problems associated with connection to a WAP arise because the SSID
was not entered properly. You must maintain the same case when entering this information. ABC is
not the same as Abc.
The alpha-numeric string is by default AMX but can later be changed to any 32-character entry.
This string must be duplicated within the Network Name (SSID) field on the WAP.
As an example, if you use TECHPUBS as your SSID, you must match this word and the case
within both the Network Name (SSID) field on the touch panel's Network Name SSID field and on
the WAP's Basic Wireless Configuration page.
802.11g wireless card
Required Information:
- SSID (Network Name used by the Target WAP)
- Encryption Method
- Passphrase
- WEP Key assignment
- Authentication Method
Configuring Communication
63