Procedure 6.5 - Replacing The Circuit Breaker - Precor C932i Service Manual

Procedure 6.5 - Replacing the Circuit Breaker

1. Set the treadmill circuit breaker in the "off" position and unplug the treadmill's line cord from
the A.C. outlet.
2. Remove the treadmill's hood.
3. Remove the two screws that fastens the A.C. input panel to the frame,. See Diagram 6.4.
4. Disconnect the wiring from the circuit breaker (2 blue wires on 120 Vac treadmills or 2 blue
and 2 brown wires on 240 Vac treadmills).
Diagram 6.4 - A.C. Input Panel
A.C. Line Filter
5. Lift the A.C. input panel from the frame and rotate it to expose the circuit breaker mounting
screws. See Diagram 6.5.
Diagram 6.5 - A.C. Input Panel
Circuit Breaker
Hardware
A.C. Line Filter
Hardware
20077-112
Circuit Breaker
C932i, C946i Treadmill
A.C. Input
Panel
Input Module
Clamp
Hardware
Input Module
Hardware
Page 41