Toshiba RAV-SM1100UT-E Service Manual page 61

10-1-2. Setup to Select Function
<Procedure> Use this function while the indoor unit stops.
1
Push , , and
SET
The unit No. displayed at the first time indicates the indoor unit address of the master unit in the group control.
In this time, fan and flap of the selected indoor unit operate.
2
Every pushing
In this time, fan and flap of the selected indoor unit only operate.
3
Using the set temperature
4
Using the timer time
5
Push button. (OK if display goes on.)
SET
• To change the selected indoor unit, proceed to
• To change the item to be set, proceed to
6
Pushing button returns the status to usual stop status.
buttons concurrently for 4 seconds or more.
button, the indoor unit numbers in the group control are displayed successively.
/ buttons, set the item code (DN).
/ buttons, select the setup data.
3
4
6
1
<Operation procedure>
1 2
2
.
.
SET DATA
UNIT No.
R.C. No.
UNIT
SET CL
5 2
3 4 5 6
– 61 –
3
END