Braun ThermoScan PRO 6000 Directions For Use Manual page 18

5
The Device tab opens.
6
Click the Configure tab to the right of the
Device information tab.
7
Click the Change button in the current
settings box. The configuration settings
dialog box opens.
8
Select the setting you wish to enable or
disable by clicking the check box next to
the setting. A check mark indicates the
setting will be enabled, an empty check box
indicates the setting will be disabled. To
select the Security function click the drop
down menu and click the desired time or Off
to disable. To restore the factory default
settings click Restore Defaults. Once the
desired settings are selected click the Save
button to send the settings to the Braun
thermometer and close the box.
To close the box without changing the settings click the Cancel button.
17