Malfunctions / Troubleshooting; Decommissioning / Disposal; End-Of-Life Decommissioning / Disposal - Dimplex LA 6 MR Installation And Operating Instructions Manual

10 Malfunctions /
Troubleshooting
This heat pump is a quality product and is designed for trouble-
free operation. In the event that a malfunction occurs neverthe-
less, you will be able to correct the problem easily yourself in the
majority of cases.
Heat pump does not run!
Please check that:
 there is no problem with the power supply (blown fuse,
power failure).
 the power switch on the remote control is switched on and
the correct operating mode is selected, as well as that the
correct setpoint temperature is set.
The preset temperature level cannot be reached!
Please check whether
 the permissible operating conditions of the heat pump are
complied with (air temperatures too high or too low).
 the air inlet or outlet areas are neither covered, obstructed
nor severely contaminated.
 valves or stop-cocks in the water lines (heating lines) are
closed.
 the water temperature in the buffer tank is sufficiently high.
If you cannot eliminate the malfunction yourself, please contact
your customer service in charge.
ATTENTION!
Work on the heat pump may be done only by an authorized and qualified
customer service.
www.dimplex.de
11 Decommissioning /
Disposal
11.1 End-of-Life Decommissioning /
Disposal
Before removing the heat pump, disconnect the appliance from
the power supply and close all valves. Environment-relevant re-
quirements regarding the recovery, recycling and disposal of
service fuels and components in accordance with all relevant
standards must be adhered to. In this context, particular attention
must be paid to the proper disposal of refrigerants and refrigera-
tion oils.
11.1
EN-9