Draytek Vigor2820 Series User Manual page 179

Default SIP Account
Default Call Route
In addition, you can press the Advanced button to configure tone settings, volume gain,
MISC, DTMF mode and MSN number. Advanced setting is provided for fitting the
telecommunication custom for the local area of the router installed. Wrong tone settings
might cause inconvenience for users. To set the sound pattern of the phone set, simply
choose a proper region to let the system find out the preset tone settings and caller ID type
automatically. Or you can adjust tone settings manually if you choose User Defined. TOn1,
TOff1, TOn2 and TOff2 mean the cadence of the tone pattern. TOn1 and TOn2 represent
sound-on; TOff1 and TOff2 represent the sound-off.
Vigor2820 Series User's Guide
invoke this function; click off to close the function.
You can set SIP accounts (up to six groups) on SIP Account
page. Use the drop down list to choose one of the profile
names for the accounts as the default one for this phone
setting.
ISDN-S0 port can pick up multiple incoming calls
simultaneously. Therefore different phone sets (MSN30 to
MSN39) can use different SIP accounts to call out through
this port.
Play dial tone only when account registered - Check this
box to invoke the function.
It determines the default direction for the call route of the
router.
To ISDN (for VoIP) - The router is set by using ISDN call.
To change ISDN call into VoIP call, please dial the character
in this field for transferring. The character that you can type
can be *, #, and 0~9.
To VoIP (for ISDN) - The router is set by using VoIP call. To
change VoIP call into ISDN call, please dial the character in
this field for transferring. The character that you can type can
be *, #, and 0~9.
171