Table of Contents
Advertisement
Repeat Button (REPEAT)
Push the REPEAT button (indicator on) to return to the beginning of
a song or section of programming and repeat its play. Push the
button again (indicator off) to cancel the repeat function and resume
normal play.
®
DOLBY
Noise Reduction (
Push in when playing tapes recorded in Dolby (the Dolby NR
Indicator will light). Push again (out) when playing tapes not recorded
in Dolby. Use of the wrong setting will affect high frequency
response.
NOTE:
The Dolby NR circuit will not operate during radio reception.
Dolby noise reduction system is manufactured under license from
Dolby Laboratories Licensing Corporation. "Dolby" and the
double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
Skip Button
The circuit senses silent passages between songs or programs on a
tape. Push upward to automatically advance to the beginning of the
next song, or downward return to the beginning of the song just
played.
NOTE:
Tapes that contain short silent passages between songs, a high level
of noise between songs, or silent passages within a song may not be
suitable for this function.
Metal Indicator (METAL)
Most metal or CrO
edge. If such a cassette is inserted, the player will detect the slots
and automatically switch to the proper equalization for full
enjoyment of metal/CrO
coded cassettes are played.
Eject
Push this button to stop and eject the tape.
Ignition Key-OFF Eject: The cassette being played will be
automatically ejected when the ignition or the unit is turned off.
NOTE:
When one side of the tape ends, "Auto-Reverse" will automatically
begin playing the other side, therefore, you must push the eject
button to stop or remove the tape.
)
cassettes are coded with slots on their back
2
tapes. The indicator light will go on when
2
(cont'd)
Hide quick links:
Advertisement
Table of Contents
