Table of Contents
Advertisement
NOTE:
If the headlight motor switch is pushed in, the headlights will not
retract when the light switch is turned off.
If the headlights neither rise nor retract, they can be operated
manually; see page 123.
If you're driving in wet snow or freezing rain, keep the headlights
in the raised position by using the headlight motor switch; this
way,they can still be used if the headlight motors freeze.
If the headlights have frozen in either the up or down position,
remove all ice before operating the headlight motors.
High Beam/Low Beam Switch
The headlights may be switched
between low beam and high beam
by pulling the turn signal lever
towards you until a click is felt. The
blue high beam indicator light will be
on when the high beam is on.
Headlight Flasher
The headlights need not be turned on to use them as a passing signal
in the daytime. First raise them with the headlight motor switch,
then lightly pull and release the light switch.
CAUTION:
Do not operate the headlight switch or headlight motor switch if
anyone's hands are near the headlights.
Pull and release
(cont'd)
Hide quick links:
Advertisement
Table of Contents
