Table of Contents
Advertisement
Heating and Cooling (cont'd)
NOTE:
The windows may become fogged if the system is in the
position for an extended period of time with the air
conditioner off. As soon as the interior is warmed, switch to the
position.
How to Use the Controls
To Ventilate
Move the temperature lever to the left, and push the
buttons. Turn the fan switch on and outside air will flow
through the side and center vents. To change air distribution, select
the
position and outside air will also flow from the heater
ducts at the floor level.
To Cool with A/C (optional on the 2.0 S and 2.0 Si models)
To cool the car down quickly, start the engine, then turn the fan
switch to high, push the A/C button on and open the windows
briefly. Then close the windows, slide the temperature lever to the
left, push the
recirculate to the
When the interior has cooled
desired speed, then push the
(outside) air to the air conditioner.
When using the air conditioner in heavy traffic, or while driving up
long hills, watch the coolant temperature gauge: if the needle moves
near the "H" end of the scale, turn the air conditioner off by
pushing the A/C button ; leave it off until the needle goes back well
into the middle of the scale.
and
air conditioner for maximum cooling.
sufficiently, switch the fan to the
buttons, so inside air will
button to direct fresh
and
Hide quick links:
Advertisement
Table of Contents
