Table of Contents
Advertisement
What the Controls Do:
FUNCTION BUTTONS
AND INDICATOR LIGHTS
TEMPERATURE LEVER
Fan Switch
Turning the dial clockwise will increase the fan speed, and the fan
will circulate warm, cool, or outside air, depending on where the
temperature lever and function buttons are set.
Function Buttons
Push the appropriate button to direct air to and from the heater,
defroster and vents. Each function button has an indicator light that
comes on when the button is pushed in.
Air Conditioner Switch (optional on the 2.0 S and 2.0 Si models)
With the fan on, push the A/C switch to operate the air conditioner;
the indicator light will come on.
Push the switch again to turn the air conditioner off.
NOTE:
If the air conditioner compressor light comes on, turn off the A/C
switch (with the engine running) and turn it on again. If the light does
not come on again, the system is functioning normally, if the light
does come on again, turn off the A/C switch and do not use the
system until it can be checked by an authorized Honda dealer.
Temperature Lever
Slide the lever from left to right to make air warmer when the
appropriate function is selected.
Fresh Air
When the
outside air will be allowed to circulate inside the car.
When the
outside air is shut off, and the air inside the car is recirculated. So,
when the heater or air conditioner is on and you want to warm up
or cool down the interior more quickly, or keep smoke or dust out
of the car without losing the heat or cool function, simply push the
button.
RECIRCULATION BUTTON
AND INDICATOR LIGHT
AIR
CONDITIONER
AND INDICATOR LIGHT
and Recirculation
button is pushed, the indicator light will go on and
button is pushed, the indicator light comes on,
FRESH AIR BUTTON
AND INDICATOR LIGHT
SWITCH
COMPRESSOR LIGHT
Buttons
FAN SWITCH
Hide quick links:
Advertisement
Table of Contents
