Table of Contents
Advertisement
Lights
Turn Signals
Push the turn signal lever down to
signal a left turn, and up for a right
t u r n .
The
i n d i c a t o r
appropriate signal lights will blink.
The lever will return automatically
to its original position when the
steering wheel is returned to
straight ahead.
For lane changing, you can signal by pushing the lever part way up
or down (to the first stop) and holding it there; the lever will return
to its original position when you release it. If either turn signal
indicator lights up but does not blink, blinks faster than usual, or
does not light up at all, check for a burned out bulb or fuse.
Headlights
Turn the light switch to the first
position
(
) for taillights, side
marker lights, position lights,
license
plate
instrument panel lights. Turn to
the second position (
and add the headlights.
When the switch is returned from the second to the first position,
the headlights will go off but will not retract; they retract when the
light switch is turned to OFF.
If the driver's door is opened when the light switch is turned to
either " o n " position, a chime will sound to remind you to turn off
your lights.
If you wish to raise or retract the headlights when the light switch is
off (to use them as a passing signal for example), you may do so by
pushing the headlight motor switch, located on the left side of the
instrument panel; see page
CAUTION:
Do not operate the headlight switch or headlight motor switch if
anyone's hands are near the headlights.
and
FIRST
STOP
l i g h t s ,
and
) to raise
32
for instructions on its use.
RIGHT
FIRST
TURN
STOP
LEFT TURN
FIRST POSITION
Turn
SECOND
POSITION
Hide quick links:
Advertisement
Table of Contents
