DAELIM S4 50cc Service Manual page 120

TRANSMISSION/CRANKSHAFT/CRANKCASE
CRANK
CRANK CRANK CRANK CRANK CRANK CRANK
CRANK CRANK CRANK CRANK CRANK CRANK
CRANK CRANK CRANK CRANK
CRANK CRANK CRANK CRANK CRANK
● Check RH. Crank case.
● Check LH. Crank case.
CRANK SHAFT REMOVAL
● If the bearing is left on the crankshaft, use a bearing
puller to remove it.
TOOL: UNIVERSAL BERING PULLER
INSPECTION
DIAL DIAL DIAL DIAL DIAL
DIAL DIAL DIAL DIAL
DIAL DIAL DIAL DIAL DIAL DIAL
DIAL DIAL DIAL DIAL DIAL DIAL DIAL
● Place the crankshaft on a stand or V-block, and
GAUGE GAUGE GAUGE
GAUGE GAUGE GAUGE GAUGE GAUGE GAUGE
GAUGE GAUGE GAUGE GAUGE GAUGE GAUGE
GAUGE GAUGE GAUGE GAUGE
GAUGE GAUGE GAUGE
measure the crankshaft runout using dial gauge.
SERVICE LIMIT: RIGHT: 0.1MM
LEFT: 0.1 MM