Lock
This function allows you to lock the whole display of the wired remote controller.
1. Press and hold the
-
indicator will be displayed.
2.
will blink if you press any buttons except
- Press and hold the
Virus doctor
Eliminate dangerous airborne contaminants and allergens, as well as bacteria and virus.
You can set or cancel the virus doctor function in the user setting mode.
- If the virus doctor function is not supported,
You can see how to access user setting mode at the page 15~16.
NOTE
button for more than 3 seconds.
button for more than 3 seconds again, this function will be canceled.
will blink when you set the virus doctor function.
User Setting
button.
Mode
ENGLISH-14