Daikin FTXZ25NV1B Service Manual page 121

SiMT041311E
No. Menu
INTELLIG.EYE
1
AIRFLOW
< Note >
Focus
• The vertical airflow direction is adjusted so that the maximum airflow rate is achieved.
Comfort
• The unit blows air upward in the COOLING operation and downward in the HEATING operation.
AUTO OFF
2
time
< Note >
• This function changes the set temperature +2˚C in COOLING / –2˚C in HEATING and the operation stops after the preset time
elapses if it is judged that no one is in the room.
• 3 minutes before the operation stops, the OPERATION lamp blinks to lower the airflow rate. After that, the operation stops.
• In this mode, the operation stops automatically. It is recommended to set the AUTO OFF operation to "Off" if a small child or a sick
person is in the room. (If a person does not move much, the sensor judges that no one is in the room and the air conditioner may
be stopped.)
• If the operation has been stopped by AUTO OFF operation, the LCD will not show "OFF."
BREEZE
3
AIRFLOW
< Note >
• This function sets the airflow rate when the vertical airflow direction is set to "BREEZE".
If you are disturbed by the unit's operating sound, set it to "Low".
HUMIDIFY
4
AIRFLOW
< Note >
• This function sets the humidified airflow rate in the "URURU" HUMIDIFY and HUMID HEATING operations.
To increase the humidified airflow rate, set it to "High" and if you are disturbed by the sound of the humidifying operation, set it to
"Low".
Installation / Operation Manual
Setting
The INTELLIGENT EYE sensor detects an area where there is a person and adjusts the
Focus
horizontal airflow direction to blow air directly on the person.
The INTELLIGENT EYE sensor detects an area where there is a person and adjusts the
Comfort*
horizontal airflow direction to avoid blowing air directly on the person.
Sets the time for stopping the operation to after 1 hour or after 3 hours.
• This function is not activated during the following operations.
1 HR *
MOLD PROOF, QUICK HEATING TIMER and
CLEANING FILTER operation
This function will be activated after the end of each operation.
3 HR
• This function is not totally activated if the 24 HOUR FRESH AIR SUPPLY VENTILATION is
set.
Auto * Sets the BREEZE AIRFLOW rate to "Auto".
Sets the BREEZE AIRFLOW rate to "Low".
Low
Sets the humidified airflow rate to "Auto".
Auto *
Sets the humidified airflow rate to "High".
High
Low
Sets the humidified airflow rate to "Low".
Description
HEATING
Operation Manual
COOLING
* Default setting
32
106