NEC UX5000 Hardware Manual page 307

Purpose
Target Phone
Install Slot
Interface to Recorder
Jacks
Recording Playback
Playback Path
Feature
Power Consumption
Power Feed / AC Adapter
Terminal Impedance
Confirmation Tone Output
Control for Recording
RoHS Compliant
Retrofit
Chapter 6
Chapter 6 - Specifications and Parts List
ADA - Recording Adapter
Recording of Handset/Headset/Speakerphone Speech
IP-CTS and Enhanced IP Phones
Enhanced Digital Phones
Bottom Slot
For Tape Recorder: Stereo Mini-Jack (3.5 mm diameter)
For ACD: Barrel Terminal (AMP)
2 - Input and Output
Stereo
When voice recording to a PC using a CTI application, it is
possible to playback through the telephone.
Voice Sent to Recorder
Hookswitch Information
0.8W approximately
Supplied by telephone - no separate AC adapter required
(unless over 900m line length from system chassis).
600 ohm or 30 ohm
Confirmation tone to far end possible if recording device has
confirmation tone generation
Recording started/stopped by off-hook or VOR
(synchronized with voice level) of the recording machine.
When the terminal is idle, no recording is done.
Yes
Can connect to UX5000 telephone on an Aspire system.
6 - 23