Router 4-Port (Rtu) Blade (Figure 2-27) - P/N 0911062 - NEC UX5000 Hardware Manual

Chapter 2 - Blade Installation and Startup
2.6.2
Router 4-Port (RTU) Blade (Figure 2-27)
This blade is an in-skin router for the UX5000. Using an RJ45, a connection can be made directly to a PC. This
blade combines multiple voice and data features into an in-skin converged networking route. The Router blade
includes a single T1 WAN interface and an integrated 4-port managed Ethernet switch with VLAN support. In
addition, an 8-port license is provided with this blade to allow for QoS on 8 simultaneous SIP calls. (Any calls
over the 8th call will go through, however, it will not have any priority queuing.)
The Router blade provides:
●
High Speed Forwarding (Routing). IPsec forwarding ability is about 100 Mbps.
●
Supported Interface:
- T1 WAN Port
- 10/100 Base-TX Ethernet WAN Port
- 4 Switched LAN Ethernet Ports (10/100/1000 BaseT) with VLAN and Port Mirroring
Capabilities
●
VPN/Firewall
●
15 VPN Tunnels
●
VoIP Application Layer Gateway (SIP, MGCP and H.323) Resolves NAT/Firewall Traversal Issues
●
QoS: Priority Queuing, Traffic Shaping, Diffserv Marking/Policing
●
VoIP Call Admission Control
2 - 54
- P/N 0911062
Figure 2-27: ROUTER BLADE
Chapter 2