Rear Drive Shaft - Polaris 2005 SPORTSMAN 500 Servise Manual

FINAL DRIVE
CAUTION:
Use an arbor press only on the outer race, as
bearing damage may occur.
4. Install snap ring into groove.

REAR DRIVE SHAFT

REMOVAL
1. Remove rear hub and bearing carrier.
Pages 7.19).
2. Tip hub outward and remove shaft from hub.
3. Pull sharply outward to remove shaft from
transmission. Install a new lock ring upon
assembly.
Pull outward sharply to re-
move from transmission
7.22
(See
Lock ring