Switch Assembly, Paper Detector - IBM 6400 series Maintenance Manual

Switch Assembly, Paper Detector

Removal
1. Prepare the printer for maintenance (page 194).
2. Cabinet Model: Remove the paper guide assembly (page 235).
Pedestal Model: Remove the top cover assembly (page 210).
3. Cabinet Model: Loosen four screws and remove the barrier shield.
(See page 269, Figure 43, items 3, 4, and 9.)
Pedestal Model: Remove the paper guide, barrier shield, and four
screws. (See page 271, Figure 44, items 3, 4, and 5.)
4. Remove the two screws securing the paper detector switch assembly.
(See Figure 50, page 285.)
5. Trace the paper detector switch cables back to the controller board,
releasing the cables from the restraints under the base casting. (See
cable routing diagram on page 306.)
6. Disconnect connector shell P106 from the controller board.
7. Remove switch cable connectors PMD and POD from connector P106
(page 198).
8. Remove the paper detector switch assembly.
254
Replacement Procedures and Illustrated Parts List