IBM 6400 series Maintenance Manual page 384

4. Connect the power stacker logic cable P103 to connector J17 on the
5. Disconnect the power supply cable from connector J101 on the CMX
6. Connect power supply cable connector P101 to the stacker power cable,
7. Route the stacker power cable and the stacker logic cable in front of the
Cutout Beneath
Card Cage Fan
Stacker Power
Cable P102 to J101
Stacker Logic
Cable
Figure 66. Stacker Power and Logic Connections on the CMX Controller Board
384
CMX controller board. (See Figure 66.)
controller board. (See Figure 66.)
then connect the stacker power cable to connector J101 on the CMX
controller board. (See Figure 66.)
CMX board and through the cutout beneath the card cage fan, as shown
in Figure 66.
Power Supply
Connector P101
CMX Board
Connector J17 to P103
CMX Board
Connector J101
Connector P103
Power Stacker