IBM 6400 series Maintenance Manual page 241
Hide thumbs
Also See for 6400 series:
- Programmer's reference manual (450 pages) ,
- Maintenance information manual (422 pages) ,
- Setup manual (370 pages)
Table of Contents
Advertisement
Platen Installation (continued)
17. Install the platen shaft pulley with the 7/64 inch setscrew facing up and
tighten the setscrew. Open and close the forms thickness lever and
check that the platen pulley setscrew does not hit the left ribbon guide.
18. Install, but do not adjust, the platen open belt and platen open motor
pulley (page 197).
19. Install the paper ironer with the black tape towards the rear of the printer
(page 236).
20. Install the shuttle frame assembly (page 249).
21. Adjust the platen gap (page 168).
22. Adjust the platen open belt (page 162).
23. Check ribbon guide alignment (page 172).
24. Check the hammer phasing (page 179).
25. Return the printer to normal operation (page 159).
Replacement Procedures and Illustrated Parts List
241
Advertisement
Chapters
Table of Contents
Troubleshooting
