Timing Belts; Replacing The Timing Belts - IBM 6400 series Maintenance Manual

Hide thumbs Also See for 6400 series:

Table of Contents

1. Remove the stacker assembly from the printer. (See page 378.)

2. Raise the elevator assembly to its highest position and secure it to the

vertical rails using tie wraps or string. (See Figure 74.)

3. If you are removing the left timing belt, remove the shoulder screw from

the pulley at the bottom of the left vertical rail, and remove the pulley.

(See Figure 77.) Go to step 6.

4. If you are removing the right timing belt, remove the two metric Allen

screws that secure the timing belt motor to the right vertical rail. (See

Figure 77.) Go to step 5.

Left Vertical Rail

Shoulder Screw

Figure 77. Removing the Timing Belt Pulley and Motor

Metric Allen

Screws and Washers

Stacker Base

Power Stacker

Chapters

Table of Contents