Checking The Input Format - Integra DTR-20.7 Basic Manual

Input Format Listening Mode
DTS-HD MSTR Direct
DTS-HD MSTR
Dolby Surround
Game-RPG
Game-Action
Game-Rock
Game-Sports
All Ch Stereo
Full Mono
4
T-D
Cannot be selected when the input format is monaural or 2 ch�
1
Center speaker or surround speakers need to be installed�
2
Surround speakers or height speakers need to be installed�
3
Center speaker, surround speakers or height speakers need to be
4
installed�
Input Format Listening Mode
DTS-ES Direct
DTS
1
ES Matrix
2
ES Discrete
Dolby Surround
Game-RPG
Game-Action
Game-Rock
Game-Sports
All Ch Stereo
Full Mono
5
T-D
Can only be selected when the back speakers are not installed�
1
Back speakers need to be installed�
2
Height speakers need to be installed�
3
Surround speakers or height speakers need to be installed�
4
Center speaker, surround speakers or height speakers need to be
5
installed�
En-26
 Stereo button
¼
You can select a listening mode for stereo and all channel
stereo sources�
1 2
Input Format
All format
3
3
Center speaker, surround speakers or height speakers need to be
1
3
installed�
3
4
2
3
4
4
4
4
5

Checking the Input Format

While audio from the player is being input, press Display on
the remote controller several times to switch the information
shown on the main unit display� For example, if "Dolby D
Listening Mode
5�1" is displayed, the Dolby Digital 5�1 ch signals are being
Stereo
input�
● The number of channels is not displayed when the input
All Ch Stereo
1
signal is "Dolby Atmos" format�
Using the Listening Modes