Bluetooth; Am/Fm Radio - Integra DTR-20.7 Basic Manual

4
®

Bluetooth

You can wirelessly enjoy music files stored in a smartphone
or other Bluetooth-enabled device� The coverage area is 48
feet (15 meters)�
● The Bluetooth-enabled device needs to support the
A2DP profile�
● Note that connection is not always guaranteed with all
Bluetooth-enabled devices�
 Pairing
Pairing is necessary when connecting the Bluetooth-
enabled device for the first time� Before starting the
procedure, learn how to enable the Bluetooth setting
function and to connect with other devices on the
Bluetooth-enabled device�
1� Press Bluetooth on the remote controller�
The unit begins pairing and "Now Pairing���" is displayed�
2� While "Now Pairing���" is on the display, complete
connection on the Bluetooth-enabled device in the
nearby area within about 2 minutes�
If the name of this unit is displayed on the Bluetooth-
enabled device's display, select this unit� Paring will end
after a short time�
● If a password is requested, enter "0000"�
● You can pair with another Bluetooth-enabled device
by pressing and holding the Bluetooth button until
"Now Pairing���" is on the display� This unit can store
the data of up to 8 paired devices�
 Playing Bluetooth-enabled devices
If the unit is on and the Bluetooth-enabled device is
connected, the input will be automatically switched to
BLUETOOTH� Play music in this state�
● It may take about a minute until connection is
established when the unit is on since the Bluetooth
function takes some time to start up�
● If the volume setting on the Bluetooth-enabled device is
En-18
low, the sound will not be output from this unit�
● Due to the characteristics of Bluetooth wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the Bluetooth-enabled
device�
● The on-screen displays are not displayed when the
OSD language is set to Chinese� Operate by confirming
the display on the main unit�
5

AM/FM Radio

The Basic Manual explains the method using automatic
tuning� For manual tuning, see the Advanced Manual�
1� Press Tuner on the main unit several times to select
either "AM" or "FM"�
2� Press Tuning Mode on the unit, so that the "AUTO"
indicator on the display lights�
3� Press Tuning jl on the unit�
The automatic tuning to a radio station starts� Searching
stops when one is tuned� When tuned into a radio
station, the " TUNED " indicator on the display lights�
c d
The "FM STEREO" indicator lights if the radio station is
an FM radio station�
TUNED
AUTO
Actual display varies
depending on the country
or the region
FM STEREO
Registering a radio station: You can register up to 40
of your favorite AM/FM radio stations�
1� Tune into the AM/FM radio station you want to
register�
2� Press Memory on the unit so that the preset number
on the display flashes�
3� Press Preset on the unit several times to select
d c
a number between 1 and 40 while the preset number
is flashing (about 8 seconds)�
4� Press Memory again on the main unit to register the
station�
When registered, the preset number stops flashing�
To select a preset radio station, press Preset
the main unit or CH +/− on the remote controller.
● To delete a preset station, after selecting the preset
number you want to delete with Preset
unit, press Tuning Mode while holding down Memory
on the main unit� When the preset number is deleted, it
disappears from the display�
AM/FM frequency step setting
It may be necessary for you to change the
frequency step to tune the radio in your area�
Change the step with the following procedure� Note
that when this setting is changed, all radio presets
are deleted�
1� After pressing Receiver on the remote
controller, press Setup�
2� Use the cursor buttons to select "6� Hardware"
and press Enter�
3� Select "Tuner" with the cursor and press Enter�
4� Select "AM / FM Frequency Step" (North
American models) or "AM Frequency Step"
(Australian models) with the cursor and select
the frequency step for your area�
on
d c
Step 3: Playing Back
d c on the main