479536
5.3.3
Element Operation (Electric Models)
The element circuit has three thermostats and has a motor switch to stop the heating if the motor
should fail.
Power is supplied to the element circuit from terminal A. From the timer, power is supplied to
terminal 15 on the selector switch and then out of terminal 16. From the selector, power is sent
through the safety thermostat to the drum outlet thermostat.
After the outlet thermostat, power is split with one feed straight to one element and the other feed
to the control inlet thermostat. After the control inlet thermostat, power is then fed to the other
element. The neutral for the elements is then wired through the motor switch and to the L2
connection on the mains terminal block.
35