Fisher & Paykel DE09 Service Manual page 31

479536
Select a drying cycle that matches the type of load being dried. Different fabrics have different
drying requirements, so it is important to choose the cycle that best describes the load. If the load
contains mainly delicate items, it is best you select the KNITS DELICATES cycle.
If unsure of the temperature to select for a load, it is best to select a lower heat rather than a higher
heat, e.g. the KNITS DELICATES or PERMANENT PRESS cycle instead of the COTTON
REGULAR cycle.
Always follow manufacturer's care label instructions when drying.
EXTRA CARE
Minimizes the likelihood of wrinkles forming in clothes if you are not able to unload the dryer
straight away.
CA
Selecting the Dryness Level
The desired dryness level can be altered. There are two dryness levels to choose between:
MORE DRY (+)
LESS DRY (–)
Refer to page 29 for dryness level descriptions.
At the end of the cycle, if the clothes are still damp or are too dry, next time just adjust the dryness
level on the timer to meet your personal preferences.
Selecting the Drying Process
There are two ways in which your dryer is able to dry clothes - by using the automatic drying cycles
or by using Timed Dry.
AUTOMATIC DRYING
When automatic drying is selected, the dryer automatically senses the dryness level of the load
and turns off when the clothes are dry. The dryer's internal computer measures the moisture
content of the load using metal sensing bars, and together with a temperature sensor determine
when the clothes have reached the selected dryness level (Refer to above - Selecting the Dryness
Level).
For optimum clothes care, match the cycle to the load. Automatic drying often provides the best
results and leads to lower energy costs than Timed Dry.
As automatic drying cycles rely on items of the load contacting sensors, it will not work when the
drying rack accessory is used.
TIMED DRY
There are three timed cycles. There is a choice of 40, 60 and 80 minutes. A cool down period of
10 minutes is included in the three cycles.
To select a timed cycle, set the cycle selector at the desired drying time you want the dryer to run
for. Throughout the cycle, the cycle selector will rotate towards the end of the cycle.
During Timed Dry, the dryer does not sense when the clothes are dry. This may cause over-
drying. We recommend that you dry the clothes for a slightly shorter time than you think they
need, or check on them regularly (to avoid over-drying).
Beginning The Drying Cycle
Once you have chosen all your desired settings, close the dryer door and press START (located
on the right-hand side of the control panel).
Opening the door during the operation will stop the dryer.
31