User instructions
Digital TV (cont)
2: You will note the key for the coloured button
commands on the bottom panel of the interface.
RED: Favourite, YELLOW: Move, BLUE: Lock &
GREEN: Delete.
Setting favourite channels
1: Use the
/
buttons to scroll through the list of
available channels.
2: When selected press the RED button to assign that
channel as a FAVOURITE. Press again to remove the
function.
Delete a channel
1: Use the
/
buttons to scroll through the list of
available channels.
2: When selected press the GREEN button to earmark
that channel for deletion from the channel list.
3: Continue steps 1-2 until you have marked all the
channels you wish to be deleted.
4: Press the EXIT button, select YES from the option
menu, then press ENTER to delete the marked
channels.
Move a channel
It is possible to re-arrange the order channels are
displayed in the EPG.
1: Use the
/
buttons to scroll through the list of
available channels.
2: When selected press the YELLOW button to activate
the move function.
3: Use the
/
buttons to scroll through the list of
channels until you reach the required new location.
4: Press the ENTER button to re-locate the channel
listing.
NOTE: the channel will be re-located above the
selected channel in the list.
Lock a channel
This function will add a parental lock to assigned
channels.
1: Use the
/
buttons to scroll through the list of
available channels.
2: When selected press the BLUE button to activate the
lock function.
3: A 4 digit pass code is required to proceed with this
function. The default code is '0000'.
4: When entered the channel will display a padlock icon
to indicate it is locked. You can proceed to press the
BLUE button adding locks to other channels.
5: Press the EXIT button when finished.
6: Any locked stations, selected for viewing will require
the 4 digit pass code.
Rename a channel
1: Press either / button to rename the selected
channel.
2: Use the numeric keypad to assign a new name.
Press each number repeatedly to cycle through the
characters assigned to that number. The on-screen
key shows a visible reference.
3: After adding each letter or number wait for a few
seconds before adding another.
4: Press the ENTER button to store the new name.
Page 8