Care & Maintenance; Troubleshooting - Bush CDVB52 Installation & User's Instructions

User instructions
Care & maintenance
Important: Always unplug the appliance from the power socket during cleaning and maintenance.
Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax polish for
cleaning.
Clean the external surfaces with a damp soft cloth only. Never use abrasive products or solvents as it may damage
the appliance.

Troubleshooting

In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below.
If the problem persists, contact the retailer if the machine is still under guarantee.
Customer helpline: 0870 600 3030
Problem
No display on the TV screen.
"No Signal"
The unit plays a strange
sound
The remote does not
respond
Forgotten the Pass Code
The unit asks to shutdown
every 3 hours
Cause
• No power
• Cable unplugged
• Is the aerial installation working?
• The aerial cable may not be
connected.
• The transmission signal may not
be broadcasting.
• The program setup is incorrect.
• Multiple audio tracks can
sometimes cause this
interference.
• The batteries may be inserted
incorrectly.
• The batteries may be dead.
• The Auto Standby function is ON.
Solution
• Make sure the mains plug is correctly
connected to the socket.
• Check cable connections in both the TV &
unit.
• Re-install the aerial setup.
• Check the cables.
• Try again later.
• Check the settings in the installation
menu.
• Change the audio track using the LANG
button on the remote control.
• Check the polarities match & the
batteries
are correctly inserted.
• Replace the batteries.
• Use the default override code '8888' .
• Disable the Auto Standby function in the
configuration options.
Page 14