Factory Default Settings; Software Version - Bush CDVB52 Installation & User's Instructions

User instructions

Factory default settings

Should you wish to restore the unit back to the factory
default settings.
1: Select Factory Default from the Digital TV menu.
2: Enter the pass code. The default is '0000'.
3: Select YES from the pop up options screen asking do
you want to perform the operation. Press the ENTER
button to initiate.
4: The display will show "factory Default" and return
to the Initial install screen outlined on page 5 of this
manual.
5: Perform the steps on page 5 to begin the initial setup
again.

Software version

If for any reason you wish to check the software
version of your unit activate this function for details.
Page 13