How To Use The Buttons - Toyotomi TKN-A28DV User Manual

REMOTE CONTROLLER
Fan speed display. Displays the selected fan speed, AUTO(no display) and three fan speed levels
LOW, MED, HIGH can be indicated. The fan speed is AUTO when the operating mode is either
AUTO or DRY.
ON/OFF Display. Displayed by pressing the ON/OFF button. Press the ON/OFF button again to
remove.
LOCK Display. Displayed when LOCK mode is activated.
FOLLOW ME Display. Displayed when FOLLOW ME mode is activated.
SLEEP Display. Displayed under SLEEPING operation.

HOW TO USE THE BUTTONS

Auto operation
Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of
the indoor unit starts fl ashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired temperature. The temperature can be set within a range
of 17 o C~ 30 o C in 1 o C increments.
3. Press the ON/OFFbutton to start the air conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by
sensing the diff erence between the actual
ambient room temperature and the setting temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL, HEAT(cooling & heating models only) or FAN mode.
2. Press the UP/DOWN buttons to set the desired temperature.
3. Press the FAN button to select the fan speed in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air conditioner. The temperature can be set within a range of
o o o
17 C~ 30 C in 1 C increments.
NOTE
In the FAN mode, the setting temperature is not displayed in the remote controller and you are not able
to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
Dehumidifying operation
Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of
the indoor unit starts fl ashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the desired temperature.
40
GB