Table of Contents
Advertisement
BUTTONS DESCRIPTION
INSTRUCTIONS FOR PROPER USE OF THE REMOTE CONTROLLER
1. The transmitter of remote controller, which is located on the front part of
remote controller, must point to indoor unit signal receiver.
2. Maximum distance between transmitter of remote controller and indoor
unit signal receiver should be 8 meters.
3. Make sure that there are no obstacles between transmitter of remote
controller and indoor unit signal receiver.
4. Do not drop down or through away remote controller.
5. Do now allow any kind of liquid to enter inside remote controller.
6. Before using remote controller for the fi rst time, install properly batteries
and make sure «+» & «-» poles are properly positioned.
7. Use two AAA batteries. Do not use rechargeable batteries.
8. Do not expose the remote controller directly to the sunlight or excessive
heat (e.g. oil radiator)
9. If you don't use remote controller for a long period, remove the batteries to
avoid possible leakage and damage.
10. If you cannot hear beep sound to each command you place through the
remote controller or if characters are not clear on the screen, then you
should change the batteries.
Note: When you power on remote controller
for the fi rst time, all functions will be displayed
on the screen. After a while only those
corresponding to current operation will be
displayed
68
GB
Advertisement
Table of Contents
