Indicators On Lcd - Toyotomi TKN-A28DV User Manual

REMOTE CONTROLLER
and will not transmit the signals to the unit. And the sleep feature is disable.
• If pushing more than 2 seconds, the system will automatically restore the current operation settings
including operating mode, setting temperature, fan speed level and sleep feature (if activated).
11. FAN SPEED Button: Used to select the fan speed in four steps: AUTO Ê LOW Ê MED HIGH.
12. TIMER ON Button: Press this button to initiate the auto-on time sequence. Each press will increase
the auto-timed setting in 30 minutes increments. When the setting time displays 10H, each press
will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program,
simply adjust the auto-on time to 0:0.
13. TIMER OFF Button: Press this button to initiate the auto-off time sequence. Each press will increase
the auto-timed setting in 30 minutes increments. When the setting time displays 10H, each press
will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program,
simply adjust the auto-off time to 0:0
14. LED/FOLLOW ME Button: Disable/Active indoor screen Display. When pushing more than 2
seconds, the FOLLOW ME function will be activated, pushing more than 2 seconds again to disable.
15. LOCK Button: When you press the recessed LOCK button, all current settings are locked in and the
remote controller does not accept any operation except that of the LOCK. Press again to cancel the
LOCK mode.

INDICATORS ON LCD

Transmission Indicator. This transmission indicator lights when
remote controller transmits signals to the indoor unit.
AUTO Function
COOLING Function
DRY Function
HEATING Function
FAN
Temp./Timer display. Displays the temperature setting(17 C~30
C). When you set the operating mode to FAN, no temperature
setting is displayed. If in the TIMER mode, shows the ON and OFF
settings of the TIMER.
39
GB