How The Air Conditioner Works - Toyotomi TKN-A28DV User Manual

Room wall mounted air conditioner inverter type
Table of Contents

Advertisement

Available languages

Available languages

ROOM WALL MOUNTED AIR CONDITIONER

HOW THE AIR CONDITIONER WORKS

DRYING OPERATION
When you push SLEEP button on the remote controller during cooling, heating (cooling only type
without), or AUTO operation, the air conditioner will automatically increase (cooling) or decrease
(heating) 1οC per hour. The set temperature will be steady 2 hours later. And the air conditioner will be
timer off in 7 hours. The fan speed will be automatically controlled. This feature can maintain the most
comfortable temperature and save more energy for you.
DRYING OPERATION
The fan speed will be automatically controlled under dry operation.
During dry operation, if the room temperature is lower than 10oC, the compressor stops operation
and restarts until the room temperature is above 12oC.
OPTIMAL OPERATION
To achieve optimal performance, please note the following:
Adjust the air fl ow direction properly so that it is not directed on people.
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive
temperature levels.
Close doors and windows on COOL or HEAT modes, or performance may be reduced.
Use TIMER ON button on the remote controller to select a time you want to start your air
conditioner.
Do not put any object near air inlet or air outlet, as the effi ciency may be reduced and the air
conditioner may stop running.
Clean the air fi lter periodically, otherwise cooling or heating performance may be reduced.
Do not operate unit with horizontal lover in closed position.
AUTO FUNCTION
When you set the air conditioner in AUTO mode,
it will automatically select cooling, heating
(cooling/heating models only), or fan only
operation depending on what temperature you
have selected and the room temperature.
The
air
conditioner
temperature point set by you. If the AUTO
mode is uncomfortable, you can select desired
conditions manually.
SLEEP FUNCTION
When you push SLEEP button on the remote controller
during cooling, heating (cooling only type without), or
AUTO operation, the air conditioner will automatically
increase (cooling) or decrease (heating) 1
The set temperature will be steady 2 hours later. And
the air conditioner will be timer off in 7 hours. The fan
speed will be automatically controlled. This feature can
maintain the most comfortable temperature and save
more energy for you.
32
will
control
room
ο
C per hour.
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents