Toyotomi TKN-A28DV User Manual page 43

Room wall mounted air conditioner inverter type
Table of Contents

Advertisement

Available languages

Available languages

REMOTE CONTROLLER
5. Wait for 3 seconds and the digital display area will show the temperature again. The «TIMER ON OFF»
indicator remains on and this function
is activated.
NOTE: The timer setting(TIMER ON or TIMER OFF) that in sequence occurs directly after the set time will
be activated fi rst.
SLEEP/FRESH function
Press this button less than 2nds will initiate SLEEP function. And if keep pressing this button more
than 2nds,the FRESH function is initiated.
The sleep function enables the unit to automatically increase(cooling) or decrease(heating) 1oC
per hour for the fi rst two hours, then hold steady for the next 5 hours, after that the unit will stop
operation. It can maintain the most comfortable temperature and save energy.
NOTE: The SLEEP function is only available under Cooling, Heating and AUTO operations.
When the FRESH function is initiated, the Ionizer/Plasma Dust Collector(depending on models) is
energized and will help to remove pollen and impurities from the air.
LED/FOLLOW ME function
Press this button less than 2nds will initiate LED function. And if keep pressing this button more
than 2nds,the FOLLOW ME function is initiated.
When the Follow Me function is activated, the remote display is actual temperature at its location.
The remote control will send this signal to the air conditioner every 3 minutes interval until press the
FOLLOW ME button again.
The Follow Me function is not available under DRY and FAN mode.
Switch the operation mode or turn off the unit will cancel the Follow Me function automatically.
TRUBO/SELF CLEAN function
Press this button less than 2nds will initiate TURBO function. And if keep pressing this button more
than 2nds,the SELF CLEAN function is initiated.
Turbo function enables the unit to reach the preset temperature in the shortest time. When press
this button on cooling mode, the unit will blow strong cooling air with super high fan speed.
When press this button on heating mode(applicable to the unit adopts PTC only), the PTC will be
energized and bring fast heating operation.
Under SELF CLEAN mode, the air conditioner will automatically clean and dry the Evaporator and
keep it as fresh for the next operation.
43
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents