Specifications - AT&T Partner II Installation And Use Manual

Specifications

Premises Equipment
Capacities
24 Centrex lines via line jacks on
four 206 and four 400 modules
24 extensions via extension jacks on
four 206 modules
1 loudspeaker paging system via
PAGE jack on primary processor
module
1 audio source via Music-on-Hold
jack on primary processor module
(RCA phono plug required)
1 call reporting device via SMDR
jack on primary processor module
(355A/F adapter required)
2 doorphones (2 extension jacks)
Dimensions
Primary Proc. Mod.
and Weights Exp. Proc. Mod.
(approx.)
206 module
400 module
Backplane & cover
MLS-34D phone
MLS-12D phone
MLS-12 phone
MLS-6 phone
MLC-6 phone
Switch Fabric
Full digital, nonblocking
Local Phone
FCC registration number (U.S): AS5 USA-61630-KF-E
Company
DOC registration number (Canada): 230 3756
Information
REN (outside line jack): 0.9A per line jack
Jack type: RJ11C
Loop start lines
Extension
Ringing voltage: +5VDC, -140 VDC peak to peak; trapezoidal wave shaping
Jack
35- to 38-Volt talk battery
Ringing frequency: 20 Hz
*The two devices combined on an extension jack can be an MLS- or MLC-model phone with a standard device, or two standard devices;
DO NOT connect two MLS- or MLC-model phones to the same extension jack. If a device lists two RENs, use the higher number when
adding up RENs.
206 Module
2 Centrex lines
6 extensions
400 Module
4 Centrex lines
11"(D) x 17"(H) x 1.5"(W) or 27.9 x 43.2 x 3.8 cm
11"(D) x 17"(H) x 1.5"(W) or 27.9 x 43.2 x 3.8 cm
11"(D) x 17"(H) x 1.5"(W) or 27.9 x 43.2 x 3.8cm
11"(D) x 17"(H) x 1.5"(W) or 27.9 x 43.2 x 3.8 cm
12"(D) x 19"(H) x 11"(W) or 30.5 x 48.3 x 27.9 cm
9.7"(D) x 5.3"(H) x 10"(W) or 24.6 x 13.5 x 25.4 cm
9.5"(D) x 5"(H) x 6.75"(W) or 24.1 x 12.7 x 17.1 cm
9.5"(D) x 5"(H) x 6.75"(W) or 24.1 x 12.7 x 17.1 cm
9.5"(D) x 5"(H) x 6.75"(W) or 24.1 x 12.7 x 17.1 cm
9.4"(D) x 3.4"(H) x 7"(W) or 23.9 x 8.6 x 17.8 cm
D
Extension Jack
Maximum 2 devices per extension jack,
total REN on jack not to exceed 2.0*
2 devices require AT&T 267F2 bridging
adapter. MLS- or MLC-model phone REN:
0 (zero)
No more than one MLS- or MLC-model
phone per jack
For programming, an MLS display phone
must be connected to extension jack 10 or
11.
4.0 lbs or 1.8 kgs
4.0 lbs or 1.8 kgs
4.5 lbs or 2.0 kgs
4.0 lbs or 1.8 kgs
5.5 lbs or 2.5 kgs
2.9 lbs or 1.3 kgs
1.8 lbs or 0.8 kgs
2.0 lbs or 0.9 kgs
2.1 lbs or 1.0 kgs
2.6 lbs or 1.2 kgs
Specifications D-1