Table of Contents
Advertisement
WINDSCREEN WASHER/WIPER
KNOW YOUR
They can be operated only with the ignition key
VEHICLE
turned to MAR-ON.
The right stalk can be moved to five different
positions:
SAFETY
windscreen wiper off.
A
intermittent operation.
B
With the lever in position B, turn control F to select
STARTING AND
one of four different speeds for the intermittent
DRIVING
operation mode:
very slow intermittent operation.
slow intermittent operation.
- -
WARNING LIGHTS
medium intermittent operation
- - -
AND MESSAGES
fast intermittent operation.
- - - -
continuous slow operation.
C
continuous fast operation
D
IN AN EMERGENCY
temporary fast operation (unstable position).
E
Temporary fast operation position E is limited to the
time that the lever is manually held in this position.
SERVICING AND
The lever returns to position A when it is released,
MAINTENANCE
automatically stopping the windscreen wipers.
IMPORTANT Replace the wiper blades as specified in
TECHNICAL
the "Maintenance and care" section.
SPECIFICATIONS
INDEX
72
Never use the windscreen wipers to
remove layers of snow or ice from the
windscreen. In such conditions, the
windscreen wipers may be subjected to excessive
stress and the overload cut-out, which prevents
operation for a few seconds, may intervene. If
rear window wiper operation is not restored,
contact a Fiat Dealership.
"Smart washing" function
Pull the stalk towards the steering wheel (unstable
position) to operate the windscreen washer fig. 72.
Keeping the stalk pulled for more than half a second,
with just one movement it is possible to operate
the washer jet and the wiper at the same time.
The wiper stops working three strokes after the
stalk is released.
fig. 72
F0N0039
Advertisement
Table of Contents
