Table of Contents
Advertisement
TRIP control button
The TRIP button, located on the top of the right
stalk fig. 20, is used (with ignition key at MAR-ON)
to display these values and reset them to start a new
mission:
❒ brief press to access the various parameter
displays;
❒ long press to reset and then start a new mission.
New mission
This begins after a reset:
❒ "manual" resetting by the user, by pressing the
relevant button;
fig. 20
❒ "automatic" resetting, when the distance travelled
reaches 3,999.9 km or 9,999.9 km (depending on
the type of display) or when the travel time
reaches 99.59 (99 hours and 59 minutes);
❒ after disconnection/reconnection of the battery.
IMPORTANT The reset operation when "Trip A"
details are being displayed only resets the
information associated with this function.
IMPORTANT The reset operation when "Trip B"
details are being displayed resets only the
information associated with this function.
Start of journey procedure
With ignition key at MAR-ON, press and hold the
TRIP button for more than 2 seconds to reset.
Exit Trip
You can automatically exit the TRIP function once all
the values have been displayed or by holding the
MODE button down for more than 1 second.
F0N0019
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
29
Advertisement
Table of Contents
