Table of Contents
Advertisement
SPRAY NOZZLES
Front windscreen (washer) fig. 242
If there is no jet of fluid, firstly check that there is
fluid in the reservoir (see "Checking fluid levels"
in this chapter).
Then check that the nozzle holes are not clogged;
use a needle to unblock them if necessary.
The washer jets should be positioned by adjusting
the angle of the sprays using a small straight-headed
screwdriver.
The jets must be directed at about 1/3 of the height
from the top edge of the windscreen.
fig. 242
HEADLIGHT WASHERS
Check the condition and cleanliness of nozzles at
regular intervals.
The headlamp washers are activated automatically
when the screen washer is operated with the dipped
headlamps on.
F0N0112
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
245
Advertisement
Table of Contents
