Functions During
Heart Rate
Measurement
SEE YOUR HEART RATE
You can see your heart rate in beats
per minute. A flashing heart symbol
indicates an ongoing heart rate
measurement. The heart symbol
flashes at the pace of your heart.
TURN THE TARGET ZONE
SOUND SIGNAL ON/OFF
When the Target Zone sound
symbol appears in the display, you
will hear an alarm sound with each
heart beat if you go above the Upper Limit
or below the Lower Limit of your Target Zone.
Press the right button to turn the Target Zone sound
signal on or off.
sound signal is on
STOP HEART RATE MEASUREMENT
Remove the Transmitter. Heart rate measurement stops.
The Polar Favor Wrist Receiver will automatically return to the
battery saving mode if no transmission signals are received
within 10 minutes.
OFF appears in the display.
8
FAVOR manual GBR/E
8-9
How to Set
Your
Target Zone
1. When you start from the OFF display, press
the left button once and you come to the
heart rate measuring mode.
2. In the heart rate measuring
mode, press the left button.
The Upper Limit value and
an arrow (
) in the upper
left corner of the display
will appear.
3. Keep pressing and hold the
button to set the Upper Limit
of your personal Target Zone.
The numbers will descend
in units of 5.
4. Release the button, when the
desired Upper Limit is reached.
The Lower Limit value and an
arrow (
) in the lower left
corner of the display will
appear.
16/1/01, 13:09
9