Initial Setup Of Au Media Tuner; Watching Tv (1Seg) - Kyocera Marvera Basic Manual

Initial Setup of au Media Tuner

To watch TV (1Seg) using the au Media Tuner, you need to
configure initial settings.
When the standby screen is displayed, press T.
Disclaimer notes are displayed.
➡ Use j to check the disclaimer notes, use j
to select OK, and then press c (選択 [Select]).
The initial setting screen for using the au Media Tuner is
displayed.
• Follow the on-screen instructions to configure each
setting. Then, the screen for setting TV (1Seg)
channels appears.
➡ Use j to select オート設定（放送波） (Auto
(Broadcasting wave)) and then press c (選択
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
• Select マニュアル設定 (Manual) to set the channel
manually.
66

Watching TV (1Seg)

When the standby screen is displayed,
press T.
■
To Change Channels
Use s to change channels.
TV (1Seg)
Change channels one by one.
1ch
• Before using this feature, you must configure au Media
Tuner initial settings (see the procedure on the left).
• Channels cannot be changed with s when the data
operation screen is displayed.
...
2ch 12ch