Kyocera Marvera Basic Manual page 12

Wipe off dust on the power plug. Failure to do so might cause fire,
burns or electric shock.
Install and position in-car devices where they do not hinder driving or
safety equipment such as airbags. Failure to do so might cause a traffic
accident. Install in-car devices following the instructions of their manuals.
When the specified charging equipment (sold separately) is not to be
used for a long time, unplug it from the power outlet. Failure to do so
might cause electric shock, fire or a fault.
Do not use in places subject to direct splashing with water, pet urine or
other liquids. Doing so might result in overheating, fire, electric shock,
or faults resulting from short circuit. In the event that the product is
splashed with liquid, immediately unplug the specified charging
equipment (sold separately).
10
Be sure to read the following
CAUTION
cautions before use.
Do not use in humid places such as bath areas, or plug/unplug the
specified charging equipment (sold separately) with wet hands. Doing
so might cause electric shock or a fault.
Charge the battery in a stable place especially while the vibration
mode set. If placed on an inclined surface or wobbly stand, the
product might fall causing injury or damage. In addition, do not cover
or wrap the product with a cloth or bedding. Doing so might cause fire
or a fault.
When unplugging the plug of the specified charging equipment (sold
separately) from the power outlet, hold and pull the power plug. If you
pull the cord, the cord might be damaged.
Do not use the common DC adapter 03 (sold separately) with the car
engine stopped. Doing so might result in draining of the car battery.
Do not leave the specified charging equipment (sold separately)
connected to the product with the battery pack removed. Doing so
might cause fire or electric shock.
Immediately discontinue use if a skin abnormality occurs, and consult
a dermatologist. Itchiness, irritation, a rash, etc. may develop
depending on your constitution/health.
Materials used in each part of the desktop holder (sold separately) are
as follows.
■ Desktop holder (sold separately)
Location Material
Outer case ABS resin
Lever, knob POM resin
Charging terminals Phosphor bronze
Finish
－
－
Gold plating (base layer:nickel)