Kyocera Marvera Basic Manual page 15

■
Main unit
●
Do not forcefully press, tap or intentionally subject the display to strong
impact. Doing so might cause scratching or damage.
●
Do not forcefully press your fingernails, sharp objects or hard objects against
keys or display surface. Doing so might cause scratching or damage.
●
Do not remove the stickers printed with the serial numbers that can be seen
when the back cover is removed. These stickers prove that the product and
the communication module you are using comply with the Wireless
Telegraphy Act and Telecommunications Operations Act.
●
Never use modified au cell phones. Use of a modified device violates the
Radio Law.
This product has acquired the certification of conformity with technical
regulations for the specified radio station based on the Radio Law, and the
"Technical Conformity Mark " is printed on the nameplate of the product as
a certificate.
If the screws of the product are removed and modifications are made to the
internal components, the certification of conformity with technical regulations
will become invalid. Never use the product without the valid certification.
Doing so violates the Radio Law.
●
To prevent unlawful modification, the product has been designed so that it
cannot be easily disassembled. Modifying the product is prohibited by the
Radio Law.
●
Contents saved in this product, such as phone book entries, e-mail and
favorites, might be altered or lost by an accident, fault, repair or other
handling. Be sure to keep a copy of important contents. Note that the
Company assumes no responsibility for any damages or lost profits resulting
from altered or lost contents.
●
Note that content data (both charged or free content) saved on the product
cannot be returned to the customer when the product is replaced for repair
of a fault, for example.
●
This product uses liquid crystal for its display. The display response speed
may become slow when the ambient temperature is low, which is due to the
property of liquid crystal and not a malfunction. The display response speed
will return to normal at room temperature.
●
Although the display used on the product is made using high-precision
technology, some pixels (dots) might be lit or out at all times. This is not a
malfunction.
●
Take care not to inconvenience people around you when you use the product
in a public place.
●
You are recommended to store copies of individual data such as photos you
took, videos and music in your PC by sending each file as mail attachment,
etc. Note, however, that you may not be able to make copies of some
copyrighted data even by the above-mentioned means.
●
Take care not to place magnetized items such as magnetic cards, speakers
and TV sets near the product, as it might cause malfunction.
Putting strong magnetism close to the product might cause false operation.
●
To prevent unauthorized use in case of theft or loss, this product is locked so
that it cannot be used unless the legitimate user's micro au IC-Card 02 is
inserted. If the user is changed to some other person, the new user should
bring the micro au IC-Card 02 to an au shop or PiPit. Note that a fee is
charged for ownership change.
●
When you put the product in your pocket or bag, take care so that the
display does not come in contact with metal objects or other hard objects, as
it might cause scratching or damage. Also, be careful not to scratch or
damage the display by using a strap whose metal or other hard part comes
in contact with the display.
●
When suddenly brought into a warm place from a cold place, or when in a
humid location, or when used where temperature suddenly changes (e.g.
near the air discharge port of an air conditioner), water droplets (i.e.
condensation) sometimes are formed inside the product. Note that when
used under conditions such as this, humidity might cause corrosion or a
fault.
●
When wiping the display, wipe with a soft, dry cloth. Use of a moistened
cloth, glass cleaner or other similar liquid might cause a fault.
●
When connecting/disconnecting an external device to/from the external
connection jack, make sure that the connector/plug on the device is straight
with the external connection jack.
●
Note that applying unnecessary force with the USB cable connected to the
USB connector might cause damage.
13