Bypass Door Gasket Replacement - Regency F3500 Owners And Installation Manual

MAINTENANCE
1. Allow the stove to burn out and cool down, until cool to touch.
2. Open stove door to access bypass door.
3. Remove loosen the 3 rear bolts, then remove 3 front bolts. Support from
the front and slide forward to remove Bypass Door Assembly.
Important: Bypass door is very heavy (>18 lbs) - use caution when servicing.
Loosen 3 rear bolts
28

BYPASS DOOR GASKET REPLACEMENT

F3500 Damper Assembly Draft
4. Slide bypass door assembly forward, lower complete assembly with care.
Lift lid on bypass door assembly to reveal gasket.
4. Remove old gasket and replace with new one.
5. Reverse steps to reinstall - ensure the pass rod is seated with the channel
on the pass door.
(Unit viewed as transparent to facilitate view)
Channel
F3500 Regency Freestanding Woodstove
Pass rod