Recommended Tools & Materials; Item You May Need - THUNDER TIGER MD500 Assembly Manual

RECOMMENDED TOOLS & MATERIALS
Adhesives:
Instant setting Cyanoacrylate adhesive (thin CA)
Slow setting Cyanoacrylate adhesive (thick CA)
10 Minute Epoxy (fast)
20-30 Minute Epoxy (slow)
Tools:
Model knife, 1/2" MASK tape
Small screwdrivers, medium screwdrivers
Scissors
Long nose pliers and diagonal cutting pliers
Drill and drill bits (1/16", 5/64")
150 grid sand paper
Fine felt tip pen and soft lead pencil
Reamer
R/C System:
6 Channel Heli radio
GYRO system
Helicoptor:
Raptor 60~90 Suggested
Adhesives - You will need two types of adhesives for
the MD-500 - Epoxy and Instant (cyanoacrylate)
adhesives. We recommend that you purchase both 5-
minute and 30-minute epoxy to cut down on assembly
time, but you can get by with only 30-minute epoxy if
time is not important.You will also need a small bottle of
both "Thick" and "Thin" instant CA adhesive.
Tools - Model assembly can be much easier if the
proper tools are used. Therefore, we have included in
our checklist to the left, a complete listing of all the tools
we used to assemble our prototype models. As you will
notice, many household tools can be utilized during
construction.
ITEMS YOU MAY NEED
TTR1115 - Precision Fueler Valve
TTR2174 - Built in Glow Plug Extension Wire
TTR4870 - Paptor 60
TTR4890 - Paptor 90
3