Panasonic KX-TA616 Installation Manual page 88

O
Case 4: Uses a different OGM when the line is busy – OGM for DISA.
Case 5: Distributes calls to the UCD group – OGM for UCD.
Case 6: Disconnects a call after the OGM – OGM for UCD.
3-38
Features
OGM1: "This is A company. For the sales division, press 1. For the service
division, press 2. To call the operator, press 0."
OGM2: "This is B company. To contact Mr. A, press 101. To contact Mr. B, press
102."
Required Settings: [502] "MODE2"
[414]-[416] "DISA1" for the A company outside (CO) line(s).
Outside Call
The line is busy.
Outside Call
OGM1: "This is A company. For the sales division, press 1. For the service
division, press 2. To call the operator, press 0."
OGM2: "We are sorry. The line is currently busy. If you want to call the operator,
press 0."
Required Settings: [502] "MODE2"
[414]-[416] "DISA1"
[506] "DISA2"
The line is busy.
Outside Call
The line is busy.
Outside Call
OGM1: "We are sorry. The line is currently busy. Please hold."
OGM2: Same as OGM1
Required Settings: [502] "MODE3"
[414]-[416] "UCD"
The line is busy.
Outside Call
OGM1: "We are sorry. The line is currently busy. Please hold."
OGM2: "We are sorry. The line is currently busy. Please call back later."
Required Settings: [502] "MODE4"
[414]-[416] "UCD"
"DISA2" for the B company outside (CO) line(s).
System
DISA with
OGM1
OGM
DISA with
OGM
OGM2
System
UCD with
OGM
OGM1
UCD with
OGM
OGM2
System
UCD with
OGM1
OGM
OGM2
3
To the designated destination
(If the operator is selected.)
(When the line is free.)
(When the line is free.)
The call is disconnected.
Features
To the Operator
To the UCD group
To the UCD group