Before System Programming; Programming Sequence - Panasonic KX-TA616 Installation Manual

4.1

Before System Programming

To enter the programming mode
Press the PROGRAM
button.
• The system password can be changed by program [002] "System Password".
!
!
• During the programming mode, your extension is treated as a busy extension.
• If you enter the wrong system password, you will hear an alarm tone (3 beeps). Try
again.

Programming sequence

After entering the programming mode
Enter the Program Address. Enter the parameters.
After pressing the STORE button, you will hear one of the following tones.
Confirmation tone (1 beep):
Alarm tone (3 beeps):
To exit the programming mode
Press the PROGRAM
button.
SECRET
1 2
4 5
7 8
0
PREV FLASH
KX-T7130
MEMORY
PROGRAM
or
Set to "PROGRAM" on
the back of the telephone.
X X X
(2 beeps):
PROGRAM
or
Set to "SET" on the back
of the telephone.
, –
CLEAR
3
PAUSE
6
STORE
9
AUTO
SELECT
END NEXT
SET PROGRAM
Press
parameters
STORE
Press the
STORE button.
This informs you that storing is completed. You can
continue programming by entering the same or another
program address
This informs you that the same parameter has already been
stored.
This informs you that the entry is invalid.
MEMORY
SET PROGRAM
system password
#
#. Enter the system password.
(default : 1234)
END
Press the END
button.
System Programming
4-3