Doorphone Ringing / Tone Pattern Selection - Panasonic KX-TA616 Installation Manual

4.2 System Programming

[706] Doorphone Ringing / Tone Pattern Selection

Selects the doorphone ringing pattern, Single, Double, Triple or S-Double.
Single:
Double:
Triple:
S-Double:
7
* Doorphone number: 1 through 4 /
Default
!
!
• When a doorphone call is received at a proprietary telephone, a tone is heard instead of
ringing.
• Feature References
Section 3, Features
Doorphone Call, Ringing Pattern Selection
[707] Doorphone Access Tone Selection
Enables or disables sending a doorphone access tone to a monitored doorphone. If enabled,
the access tone is heard from the doorphone when monitoring from a telephone starts.
7
* Doorphone number: 1 through 4 /
Default
• Feature References
Section 3, Features
Doorphone Call, Room Monitor
4-74
System Programming
1 s
0 6
NEXT
All doorphones – Triple
0 7
NEXT
All doorphones – Enable
doorphone no.*
(1···4/ )
(Single/Double/
Triple/S-Double)
NEXT
(All doorphones)
doorphone no.*
SELECT
(1···4/ )
(Enable/
Disable)
NEXT
(All doorphones)
[706]-[707]
SELECT STORE
To continue
or
PREV
STORE
To continue
or
PREV
END
END